SHARE

Three Keys to a Successful Home Wind Turbine Installation

Posted by Chip Means on April 24, 2015
Three Keys to a Successful Home Wind Turbine Installation

You’ve sold your customer a great energy solution in the form of a small wind turbine, which will give them years of clean power from a vast and plentiful renewable resource. Now you just need to install it.

A successful home wind turbine installation goes beyond groundwork and wiring. Follow these three quick tips to ensure your wind installation is a breeze.

1. Seek assistance in raising the tower.

Most home wind turbines are installed on tilt-up tower solutions that use a gin pole and a winch. Simple, right? Well, if you’ve never hoisted a tilt-up tower, you should know it’s a slow-and-steady process that relies on careful counter-tension and proper anchoring. Three people can get a tower up without a lot of trouble, but you’ll save time (and face) by enlisting help from someone who’s done it before.

If you can’t find a friend or fellow installer who has been involved in a tower raising, the answer may lie with the manufacturer of the turbine or tower you’re using. The manufacturer will have documentation and installation guides that will serve as an excellent resource. Study these before arriving at a customer’s site, and call the manufacturer with any questions you have. Make sure you’re comfortable and confident in the process. Nothing takes the thrill out of a homeowner’s installation day like watching a group of guys scratch their heads in the middle of a field for a few hours… or worse, seeing their brand-new turbine do a 100-foot nosedive.

In addition to the many guidelines you should follow in installing a tower, please always keep two basic precautions in the front of your mind:

Never allow anyone to stand in the fall zone of a tower while it’s being raised or lowered, and always triple-check that your guy wires are properly attached before moving the tower.

2. Keep it simple: Work with pre-engineered products.

Anyone who has installed residential wind or PV can attest that these installations can often become muddled by the number of hardware components that need to be wired and configured on-site. Look for products that are manufactured with installers in mind. Recommend that your customers choose pre-engineered solutions that have thorough manuals and accessible customer support. These should be at the top of your list—they’ll save you critical time and money, especially on a complex site installation.

Some home wind turbines and inverters now use high voltage (380 VDC), allowing you to use economical 12-gauge wire and long wire runs with low loss, making setup more flexible and efficient.

3. Avoid “surprises” by clearing administrative steps before installation day.

Installation day can become “installation week” or “installation month” if you arrive to a site and learn that the homeowner doesn’t have proper permitting or interconnection agreements. You never want to hear, “I didn’t realize this town has a tower height restriction” after you’ve purchased and delivered a turbine tower, or “oh, I thought you were calling the utility” for the grid interconnection step. A successful project has a general contractor who works actively with customers, system manufacturers, utility providers, and town officials at every phase. Do yourself a favor and solve these problems early and often – from the comfort of your office, not the homeowner’s driveway.

Installing a small wind turbine system is in many ways easier than ever, but it’s still important you arrive ready to give your customer a good experience. Know the product and know the hurdles in advance, and seek help when you need it. Document your steps with photos and notes to help yourself succeed with future installations. This will also protect product warrantees and maximize support from manufacturers.

Remember: A home wind turbine often can be seen from great distances – make sure your customer can give all their neighbors a good story about your hard work!

 

Chip Means is the director of sales development for Pika Energy.

Comments
Add a new blog comment!

Enter your comments in the box below:

(Please note that all blog entries and comments are subject to review prior to posting.)

 

While we will do our best to monitor all comments and blog posts for accuracy and relevancy, Home Energy is not responsible for content posted by our readers or third parties. Home Energy reserves the right to edit or remove comments or blog posts that do not meet our community guidelines.

Recent Blogs
Three Keys to a Successful Home Wind Turbine Installation

Three Keys to a Successful Home Wind Turbine Installation

Chip Means

You’ve sold your customer a great energy solution in the form of a small wind turbine, which will give them years of clean power from a vast and plentiful renewable resource. Now you just need to install it. [continue reading]

To Zero and Beyond!

To Zero and Beyond!

Ann Edminster

The Net-Zero Energy Coalition convened the second Net-Zero North American Leadership Summit from March 3–5 as part of NESEA’s blockbuster BuildingEnergy15 conference. Summit participants gathered to share experience and collaborate on strategies to accelerate the development of net-zero energy buildings and communities across the continent. Kicked off with an inspirational address from Massachusetts State Senator Jamie Eldridge, the Summit created dialogue among federal, state, and city officials, major utilities, non-profits, education institutions, and ... [continue reading]

The Evolution of Home Energy Management

The Evolution of Home Energy Management

Charlie Hewitt

In the hierarchy of dreaded activities, reviewing the monthly electricity bill ranks alongside stepping on the bathroom scale. As with most bills, the primary focus is typically on the amount due. The number of kilowatt-hours consumed receives only a secondary glance. However, understanding the details behind the monthly usage may yield opportunities for reducing your energy bill. [continue reading]

Simple Sales Strategies

Simple Sales Strategies

Mike Gorman

Everyone was seated waiting for the train to depart when vendor #1 stood at the front of the car and held up a familiar brand of chocolate candy bars announcing their price. Then he walked through the car and offered a candy bar to each of the passengers. I watched as he sold two candy bars in that group. [continue reading]

The Consequences of Flush Toilets

The Consequences of Flush Toilets

Shawna Henderson

So there's lots of excellent work and capacity building going on, and net zero energy, low energy, and high performance houses are being designed and built throughout North America. Innovation and forward thinking abound. It's all very exciting. But there's a place past which most builders, designers, and homeowners will not go: beyond low-flow plumbing fixtures, specifically toilets. Massive infrastructure has made it pretty convenient to not think about the consequences ... [continue reading]

Home Control or Automation?

Home Control or Automation?

Clint Stevens

I have been involved in home automation heavily over the last few years. At my home in Utah, I started by using a Mi Casa Verde and slowly moved over to SmartThings. The path has been long and hard, and littered with various devices, some of which are still in use. Belkin Wemo, Phillips Hue, Revolv, TCP bulbs, and Nest, along with several others make up the pack. Along the way, I’ve come ... [continue reading]

BPI Introduces New BPI.org for Consumers

BPI Introduces New BPI.org for Consumers

Leslie McDowell

The Building Performance Institute, Inc. (BPI) recently introduced www.bpi.org for consumers, a new interactive website designed to educate homeowners on the value of home performance energy upgrades and the quality of contractors who have earned the BPI GoldStar credential. [continue reading]

PHIUS to Launch North American Passive Building Standard at Event in Seattle

PHIUS to Launch North American Passive Building Standard at Event in Seattle

Mike Knezovich

The Passive House Institute US (PHIUS) recently announced that Executive Director Katrin Klingenberg will formally launch the new PHIUS+ 2015 passive building standard on March 25 at Seattle’s Bullitt Center. [continue reading]

Energy Code Enforcement is Part of the Foundation

Energy Code Enforcement is Part of the Foundation

Caitriona Cooke

Smart building design and construction professionals know that a building is more than a sum of its parts—it’s a complex system. For example, a poorly designed HVAC system can turn an otherwise efficient home into an energy hog. The understanding that a home is a complex system is reflected in today’s building codes, and proper compliance ensures that we’re building better energy performance into the process from ... [continue reading]

Why I Love Dumb, Passive Do-Nothing Houses

Why I Love Dumb, Passive Do-Nothing Houses

Shawna Henderson

I've had a decades-long love affair with dumb, passive houses. Passive. As in do-nothing. I love the design challenge of making do with the site and the microclimates that a house can be tucked into, the available solar gain, the building envelope. The minimal interjection of technology to maintain comfort has always been appealing to me, mainly because I'm selectively cheap and lazy. I don't want to do anything that costs ... [continue reading]

Earn BPI CEU credits
HEP
Home Performance with EnergyStar
Email Newsletter

Home Energy E-Newsletter

Sign up for our free monthly
E-Newsletter!

Harness the power of
HOME PERFORMANCE!

Get the Home Energy
e-newsletter

FREE!

SUBSCRIBE

NOW!