Weatherize Murray City
A Rural Community Revitalization Approach
An energy service company in New York installed light sensitive thermostats in a complex where the residents covered windows with heavy curtains to curtail air leakage. [continue reading]
Multifamily buildings vary widely. They range from houses divided into three apartments to 500-unit high rises. So a weatherization project must be tailored to fit the personality of the building. [continue reading]
Several years ago, Syracuse Energy Service Company installed automatic, 8deg. set-back thermostats with small dials in a seniors complex. It became apparent that some outreach was needed when several people from the complex disembarked from a rented bus and stormed the office in protest. [continue reading]
Since most apartment dwellers are renters, the first goal is to sort out who pays the bills for what fuels. [continue reading]
Weatherizing multifamily buildings can yield substantial savings for both owners and occupants, according to the results of case studies of buildings throughout the country. [continue reading]
Most newer manufactured homes in the Pacific Northwest, as well as many older mobile homes, have a vapor retarder on the inside of the wall cavity--typically right behind the gypsum board. However, many older mobile homes, especially those built before the 1980s, were manufactured with a vapor retarder on the outside of the wall cavity--generally right behind the metal (or sometimes wood) siding. [continue reading]
If you could tackle a few easy tasks that would keep you warm and snug all winter – and save ...
The Building Performance Institute, Inc. (BPI) is proud to announce that BPI-1100-T-2014: Home Energy Auditing Standard has been published ...