The Future of Building Performance and the HVAC Industry
The building performance and HVAC industries are destined to interact in the marketplace, since they both work for and with millions of American homeowners and businesses. The two industries share important common ground in that ...
Consider turning attic fans on when checking for the worst case CAZ depressurization. [continue reading]
To quote the wise Yogi Berra, “You’ve got to be very careful if you don’t know where you are going, because you might not get there.” In terms of ... [continue reading]
The International Energy Conservation Codes (IECC 2009 and 2012) require HVAC ducts to be tested to prove a minimum leakage of a rather easily obtained 12 CFM/100 square feet of conditioned floor area. While many states and localities ... [continue reading]
After I described how air can get sucked down the chimney and vent connector and flue, and out the draft diverter of the gas water heater, and into the basement, the mother, who was now ... [continue reading]
As any BPI Building Analyst will tell you, it’s hard to become adept at combustion testing. It takes lots of practice, in real houses, with real mechanical equipment. No amount of classroom training ... [continue reading]
Looking for a draft in a flue by measuring just the pressure in the flue—with reference to the combustion appliance zone, or CAZ—is a bit like discussing the speed of a ... [continue reading]
Homeowners are often aware of the different problems they experience in their homes: uncomfortable rooms, high utility bills, poor indoor ...
The Deputy Director-General of the Confederation of British Industry (CBI) Katja Hall told the CBI Energy Conference on July 17th ...