Boosting Multifamily Energy Savings Through Lighting Control Settings
By reducing the off-delay interval to 30 seconds, a building owner can see energy savings of more than 75%.
The presence of lead-based paint in older multifamily housing is a major public health concern. Dealing with these lead hazards offers opportunities for improving not only the health of the occupants but also the energy performance of the units. [continue reading]
Many plumbing and heating designers have considered the tankless coil heating system to be the least efficient method of heating domestic hot water (DHW) in a multifamily building. [continue reading]
How do you use diagnostic equipment (such as blower doors, and pressure sensors) to measure air flows in high-rise apartment buildings? [continue reading]
Walking through abandoned multifamily buildings is urban spelunking. The buildings are dark, dreary, and damp. Water drips in from the roof. Pitfalls abound. One must be cautious of dark shafts and mounds of who-knows-what. H [continue reading]
Auditing low-rise garden apartments is different from auditing single-family or high-rise multifamily buildings. [continue reading]
Last summer, the Applied Building Science Center received a call to investigate a North Carolina multifamily residence where it was raining inside the apartment. This home serves as an example of the need for good air sealing and a whole-building approach. [continue reading]
So there's lots of excellent work and capacity building going on, and net zero energy, low energy, and high ...
I have been involved in home automation heavily over the last few years. At my home in Utah, I started ...