Boosting Multifamily Energy Savings Through Lighting Control Settings
By reducing the off-delay interval to 30 seconds, a building owner can see energy savings of more than 75%.
Air sealing, heating systems, air conditioners, domestic hot water, lighting, fuel bill analysis, customer education.... Sounds like a typical issue of Home Energy. [continue reading]
When the Minneapolis Energy Office (now the Center for Energy and Environment) first addressed the issue of improving energy efficiency in multifamily buildings in 1981, the task was a little daunting. [continue reading]
Multifamily buildings vary widely. They range from houses divided into three apartments to 500-unit high rises. So a weatherization project must be tailored to fit the personality of the building. [continue reading]
The replacement of incandescent lighting--particularly hallway fixtures and exit signs that consume electricity 8,760 hours a year in many multifamily buildings--with compact fluorescent lamps (CFLs) yields substantial energy savings and should be easy to promote. [continue reading]
In a study funded by the U.S. Department of Energy and the Department of Housing and Urban Development, we looked at the savings persistence from equipment retrofits that Citizens Conservation Corporation (CCC) installed in low-income apartment buildings over the past decade. [continue reading]
Several years ago, Syracuse Energy Service Company installed automatic, 8deg. set-back thermostats with small dials in a seniors complex. It became apparent that some outreach was needed when several people from the complex disembarked from a rented bus and stormed the office in protest. [continue reading]
Do you know that, according to the DOE, the United States uses up energy worth nearly a million dollars every ...
The different types of windows homeowners might consider may include wood, vinyl, and fiberglass. Most people think that wood is ...