Weatherize Murray City
Discover how becoming a BPI GoldStar Contractor can help set you apart.
An energy service company in New York installed light sensitive thermostats in a complex where the residents covered windows with heavy curtains to curtail air leakage. [continue reading]
Multifamily buildings vary widely. They range from houses divided into three apartments to 500-unit high rises. So a weatherization project must be tailored to fit the personality of the building. [continue reading]
Several years ago, Syracuse Energy Service Company installed automatic, 8deg. set-back thermostats with small dials in a seniors complex. It became apparent that some outreach was needed when several people from the complex disembarked from a rented bus and stormed the office in protest. [continue reading]
Since most apartment dwellers are renters, the first goal is to sort out who pays the bills for what fuels. [continue reading]
Weatherizing multifamily buildings can yield substantial savings for both owners and occupants, according to the results of case studies of buildings throughout the country. [continue reading]
Most newer manufactured homes in the Pacific Northwest, as well as many older mobile homes, have a vapor retarder on the inside of the wall cavity--typically right behind the gypsum board. However, many older mobile homes, especially those built before the 1980s, were manufactured with a vapor retarder on the outside of the wall cavity--generally right behind the metal (or sometimes wood) siding. [continue reading]
Residential energy efficiency (EE) receives relatively little attention compared to major projects like the retrofit of the Empire State Building ...
On August 27, The Energy Conservatory (TEC) participated in a webinar titled, “Meeting the RESNET Equipment Calibration Requirements - ...