Impact of Enhanced Drying and Remediation on Mold in Flooded Buildings
Tuskegee University (TU)’s previous flood damage resistance work was described in three earlier articles (“After the Flood—There’s Hope,” HE Sept/Oct ’04, p. 18; “Flood Testing Gets ...
In September 1998, roofer Kevin Fischer, carpenter/painter Bill Coyle, and I were called to help out on an 80-year-old, three-story, wood frame house located in southern New Jersey. [continue reading]
Mold, mildew, failing grout, dislodged tiles, water stains, wet insulation, rotting walls--moisture in bathroom walls causes serious problems. [continue reading]
Anyone who has lived in a snowy climate has seen ice dams. Thick bands of ice form along the eaves of homes, causing millions of dollars of structural damage every year. [continue reading]
Moisture problems occur in buildings throughout North America, in almost every climate. The most common symptoms are mold, mildew, and condensation, and these can impair the health of the occupants, cause discomfort, and decrease the life of the structure. [continue reading]
Most newer manufactured homes in the Pacific Northwest, as well as many older mobile homes, have a vapor retarder on the inside of the wall cavity--typically right behind the gypsum board. However, many older mobile homes, especially those built before the 1980s, were manufactured with a vapor retarder on the outside of the wall cavity--generally right behind the metal (or sometimes wood) siding. [continue reading]
Using the wind energy and solar power you can supply your home with ecologically produced electricity. These systems will decrease ...
You probably know that October is Energy Action Month, the perfect opportunity for home performance contractors to promote direct install ...