PREMIUM CONTENT

Converting From Steam To Hot Water

July/August 2009
This article originally appeared in the July/August 2009 issue of Home Energy Magazine.
SHARE
Click here to read more articles about Consumer Information
July 01, 2009
Q . Is it feasible to retrofit cast-iron single-pipe steam radiators to work on hot water from a new combined heating/domestic hot water (DHW) system?  And if so, would it ever make sense to integrate that into a solar hot water system (SHW)?  I’ve heard that hot water radiators are more efficient than steam in the San Francisco Bay Area. Tom White Home Energy Magazine Steve Greenberg replies: STEVE GREENBERG  is a facilities energy management engineer at Lawrence Berkeley National Laboratory and a technical editor at Home Energy. A. Such a retrofit is possible, but you might need more area (bigger radiators) if you’re using hot water rather than steam, mostly because the water isn’t as hot as the steam, and partly because phase change heat transfer (that is, condensing steam) is more effective than convection (that is, hot water in the tubes); note that the effectiveness of the heat exchanger is not the same as system efficiency. But if the conversion is being done at the same time as the house is being tightened (better windows, insulation, and so on), it might work well with the existing radiators. ...

To read complete online articles, you need to sign up for an Online Subscription.

Once an order has been placed there is an automatic $10 processing fee that will be deducted with any cancellation.

The Home Energy Online articles are for personal use only and may not be printed for distribution. For permission to reprint, please send an e-mail to contact@homeenergy.org.

Email Newsletter

Home Energy E-Newsletter

Sign up for our free monthly
E-Newsletter!

Harness the power of
HOME PERFORMANCE!

Get the Home Energy
e-newsletter

FREE!

SUBSCRIBE

NOW!