Get Started Using BEopt
This online-only article is a supplement to the July/August 2015 print edition of Home Energy Magazine.
June 22, 2015
Download BEopt and EnergyPlus or DOE-2. Once they are installed, start BEopt and select either New Construction or Retrofit mode. Geometry screen. Click and drag to draw your building floor plan. Options screen. Select building component options to analyze in each category (wall insulation, air leakage, air conditioner efficiency, and so on). In Design mode, one option per category can be selected. In Parametric and Optimization modes, multiple options per category can be selected by Control- or Shift-clicking. Site screen. Specify location, utility rates, and economic parameters. Click the Run button to start running simulations. The first time you run simulations, you will be prompted to point to the installation directory for EnergyPlus or DOE-2. This setting is also accessible from Tools > Settings > Simulation Engines. Output screen. The optimization curve is displayed in the upper left. Each point represents a different design and can be selected to examine the breakdown of energy end uses (bottom left) and the descriptions and costs of the options making up that design (right side of screen). For more help getting started, watch the training videos.
To read complete online articles, you need to sign up for an Online Subscription.
Once an order has been placed there is an automatic $10 processing fee that will be deducted with any cancellation.
The Home Energy Online articles are for personal use only and may not be printed for distribution. For permission to reprint, please send an e-mail to email@example.com.