SHARE

New Zero-Energy Homes Almost to Cost Parity, While Codes & Incentives Help Cross the Finish Line óBy RMI's Alisa Petersen

Posted by Rebecca Cole on November 27, 2018

If you had a choice between building new homes that meet basic standards and building comfortable, healthy homes that dramatically cut energy bills, which would you prefer? How about if the low-energy homes cost the same (or nearly the same) as a standard home to build? If the cost is relatively equal, shouldn’t every new home be built this way?

A recent Rocky Mountain Institute report, The Economics of Zero-Energy Homes: Single-Family Insights, makes the case that not only is this vision becoming achievable, in some locations in the United States the economics are in place today to make cost parity (almost) a reality. And in one New England location—thanks to progressive incentives and energy codes—it is a reality.

In our report, we analyzed four cities—Houston, Atlanta, Baltimore, and Chicago—to determine the current incremental cost to build a zero-energy (ZE) or zero-energy ready (ZER) home in climate zones 2 through 5 (where 90 percent of new construction homes are built) to determine the most cost-optimal energy upgrade package. ZE homes produce or procure as much renewable energy as they consume over the course of a year. ZER homes are designed to achieve ZE levels of efficiency but don’t yet have solar photovoltaics. We found that the cost increase to build a ZE or ZER home is modest in all four zones, with incremental costs averaging 7.3 percent for ZE homes and 1.8 percent for ZER homes—far less than consumers, builders, and policymakers may realize.

To scale the results of our four-city analysis across the country, we used RSMeans to adjust the labor and material costs, PVWatts to adjust the solar resource, EnergySage to adjust the solar cost, and the Pacific Northwest National Laboratory’s analysis of the International Energy Conservation Code (IECC) to adjust incremental costs in relation to local energy codes. We did not factor in local incentives. Using this approach, we approximated the incremental cost in the 47 most populous US cities (see Figure 1). At a 1.1 percent incremental cost, many cities on this list may have incentives available that could result in cost parity for ZER homes. This is exciting because ZER homes can be built anywhere regardless of solar resource and roof design, and so are incredibly scalable.

Figure 1: Zero-energy and zero-energy ready results scaled to the 50 most populous cities in the US (Note: Milwaukee, Minneapolis, and Miami were among the top 50 most populous cities but were excluded because they are outside of IECC climate zones 2–5)

 

City

ZE Incremental Cost

Energy Savings for ZE

ZER Incremental Cost

Energy Savings for ZER

New York City, NY

$19,534

$2,270

$4,166

$850

Los Angeles, CA

$18,661

$2,011

$2,330

$701

Chicago, IL

$19,702

$2,059

$1,945

$746

Houston, TX

$14,713

$1,365

$1,290

$431

Phoenix, AZ

$15,619

$1,728

$1,769

$602

Philadelphia, PA

$22,103

$1,281

$7,621

$608

San Antonio, TX

$15,298

$1,340

$1,243

$444

San Diego, CA

$17,733

$1,128

$2,228

$393

Dallas, TX

$15,195

$1,473

$1,681

$513

San Jose, CA

$18,581

$1,743

$2,634

$607

Austin, TX

$15,066

$1,331

$1,228

$441

Jacksonville, FL

$12,806

$1,390

$1,243

$464

San Francisco, CA

$17,953

$2,608

$2,694

$909

Columbus, OH

$20,095

$2,410

$3,877

$1,094

Fort Worth, TX

$15,291

$1,473

$1,661

$513

Indianapolis, IN

$19,903

$1,957

$3,919

$889

Charlotte, NC

$18,857

$1,668

$6,509

$722

Washington D.C.

$17,121

$1,855

$2,738

$699

Seattle, WA

$13,815

$1,349

$3,125

$505

Atlanta, GA

$19,548

$1,833

$6,094

$794

Denver, CO

$24,248

$1,860

$1,358

$674

Boston, MA

$21,050

$1,816

$1,837

$658

El Paso, TX

$17,694

$1,639

$1,600

$571

Detroit, MI

$19,753

$2,508

$1,574

$909

Nashville, TN

$19,355

$1,812

$5,406

$860

Memphis, TN

$18,864

$1,613

$5,817

$699

Portland, OR

$15,551

$1,531

$2,976

$573

Oklahoma City, OK

$16,153

$1,374

$1,641

$479

Las Vegas, NV

$17,793

$1,589

$2,066

$558

Louisville, KT

$19,647

$1,771

$5,667

$840

Baltimore, MD

$15,828

$2,000

$2,738

$749

Albuquerque, NM

$26,654

$2,103

$5,406

$998

Tucson, AZ

$16,306

$1,396

$1,321

$466

Fresno, CA

$18,013

$1,743

$2,390

$607

Sacramento, CA

$17,915

$1,834

$2,411

$639

Mesa, AZ

$16,586

$1,499

$2,140

$616

Kansas City, MO

$19,806

$1,897

$3,035

$711

Long Beach, CA

$18,305

$1,372

$2,269

$478

Omaha, NE

$24,060

$2,171

$3,834

$986

Raleigh, NC

$18,805

$1,633

$6,440

$707

Colorado Springs, CO

$26,694

$2,277

$3,578

$1,034

Virginia Beach, VA

$16,773

$1,502

$2,827

$566

Oakland, CA

$17,911

$1,743

$2,613

$607

Tulsa, OK

$16,887

$1,136

$1,661

$396

Arlington, TX

$15,296

$1,473

$1,702

$513

New Orleans, LA

$16,859

$1,261

$1,337

$418

Wichita, KS

$19,162

$1,865

$2,440

$703

 

The Importance of Codes and Incentives

Our research uncovered a basic truth: Not all cities are created equal in terms of the cost to build ZE and ZER homes. Even the exact same home with the exact same energy upgrade package can result in significantly different costs in a different city.

Why?

Robust local building energy codes (like IECC 2015), better solar resources, lower labor and material costs, and comprehensive incentives all make it easier to build ZE and ZER homes at a lower cost. Therefore, cities with these features get closer to ZE/ZER cost parity, and those without are farther from parity.  

For example, Chicago has a stronger building energy code than the modeled baseline (IECC 2015 versus 2009, respectively). ComEd, the utility that serves Chicago, offers incentives for appliances, smart thermostats, heat pump systems, and hot water heat pumps. The combination of stronger energy codes and solid local incentives brings the incremental cost of a ZER home in Chicago from $5,368 to $495. At this incremental cost, ZER homes would pay back in less than a year through utility bill savings.  

One city is already proving that building cost-parity ZER homes is a reality, thanks to a forward-thinking program from Mass Save, a collaborative of Massachusetts’ natural gas and electric utilities and energy efficiency service providers, including Berkshire Gas, Blackstone Gas Company, Cape Light Compact, Columbia Gas of Massachusetts, Eversource, Liberty Utilities, National Grid, and Unitil. The program offers performance-based incentives that offset the entire estimated incremental cost of $1,837, meaning that the cost barrier to ZER homes is eliminated in Boston.

Building ZE Homes at ZER Prices

While ZER homes are nearing and, in some cases, even achieving cost parity, ZE homes appear to have a long way to go before cost parity is achieved. But what if we could build ZE homes at ZER prices?

Enter third-party-owned solar financing. There are two types of third-party-owned solar financing methods: a solar lease and a solar power purchase agreement (PPA). In a solar lease, the customer pays a specified amount every month, regardless of the system’s energy production. In a solar PPA, the customer pays a specified amount per kilowatt-hour of generation, so the amount paid varies monthly as a function of generation. In 2017, 41 percent of residential solar was third-party owned, so this is a common model. By utilizing third-party-owned solar financing, builders can build ZER homes and at no additional upfront cost turn it into a ZE home.

Further, in some locations, solar PPA or loan providers can offer contracts that provide homeowners with cheaper electricity rates than those available through utilities. Notably, Lennar, the second largest builder in the United States, recently created a PPA that sets the solar price 20 percent below utility rates for 20 years. This means homeowners will pay lower utility bills than living in a ZER home, and all their energy consumption will be offset by solar.

Getting Over the Finish Line

Many cities are close to achieving cost parity for ZER and ZE homes, and city policymakers can take action to help push them across the finish line. Stronger energy codes will bring the bar higher for all new construction homes, and therefore lower the incremental cost of ZER. Additionally, city policymakers can work with the local utility to provide comprehensive incentives for homes that are performing significantly better than code baseline. Finally, to help ZE homes achieve cost parity, city policymakers can encourage businesses to offer PPAs and solar loans by working with utilities to offer favorable interconnection and net-metering policies and by providing clarity around any legal or regulatory requirements for third-party solar ownership models.

To learn more about  The Economics of Zero Energy Homes: Single Family Insights report, check out the Zero-Energy Homes Are Ready for Mainstream Markets blog or this webinar summarizing the report. Stay tuned for an update that includes climate zones 6 and 7 and a similar report featuring multifamily buildings coming out in the first quarter of 2019.

Comments
Add a new blog comment!

Enter your comments in the box below:

(Please note that all blog entries and comments are subject to review prior to posting.)

 

<< Back to blogs

While we will do our best to monitor all comments and blog posts for accuracy and relevancy, Home Energy is not responsible for content posted by our readers or third parties. Home Energy reserves the right to edit or remove comments or blog posts that do not meet our community guidelines.

SPONSORED CONTENT Home Diagnosis: The First TV Series about Home Energy! Learn more! Watch Video
Email Newsletter

Home Energy E-Newsletter

Sign up for our free monthly
E-Newsletter!