SHARE

Window Film Could Save California Residents 4-Million Barrels Of Oil

Posted by Darrell Smith on March 11, 2014
Window Film Could Save California Residents 4-Million Barrels Of Oil
Window film can cut energy use without ruining your view—something to ponder.
The International Window Film Association (IWFA) said California residents can save the equivalent of four million barrels of oil yearly, or about the annual output of three, 500-Megawatt power stations, if window film were installed on just 10 percent of the dwellings built before building energy codes were mandated.
 
California leads the way as the first state to add window film into its building code and the opportunity for achieving the state’s energy goals may be closer when window film is factored in. The California Building Standards Commission (CBSC) recently approved a new code that becomes effective in 2014. The CBSC adopted extensive energy code requirements voted by the California Energy Commission in 2012. 
 
“We need to continually look for smart, cost-effective ways to save energy and reduce peak electricity load,” said Commissioner Andrew McAllister of the California Energy Commission. “Window film is a product that needs to be considered as an important retrofit solution as we upgrade legacy dwellings in the Golden State,” he added.
 
Independent analysis conducted by ConSol a California based energy consulting firm, reported that window film is one of the most cost-effective measures to reduce energy use in California. In fact, window film outpaces traditional techniques such as updating HVAC systems, air sealing and caulking or adding R-38 ceiling insulation. ConSol’s study used many of the same processes the California Energy Commission utilizes in determining relative value of energy savings for the state. The complete report can be found here
 
In California, there are nearly 9,000,000 dwellings built prior to the energy building codes. By professionally installing window film on just 900,000 dwellings or 10 percent, ConSol conservatively estimates window film may cut a typical dwelling’s annual energy use by 10 percent. Taken together this could add up to 7,150,250,000-kilowatt hours. The savings is comparable to what three power plants could produce annually, or the conversion equivalent of 4,000,000 barrels of oil, according to ConSol.
 
“Without a doubt, window film offers an enormous potential for energy savings in the California market and consumers may not need to replace their windows at all,” said Darrell Smith, executive director of the IWFA. “We hope that policy makers in other states will take California’s lead and develop programs that encourage this extremely cost-effective solution for consumers,” he added.
 
 

Comments
Add a new blog comment!

Enter your comments in the box below:

(Please note that all blog entries and comments are subject to review prior to posting.)

 

<< Back to blogs

While we will do our best to monitor all comments and blog posts for accuracy and relevancy, Home Energy is not responsible for content posted by our readers or third parties. Home Energy reserves the right to edit or remove comments or blog posts that do not meet our community guidelines.

Email Newsletter

Home Energy E-Newsletter

Sign up for our free monthly
E-Newsletter!

Harness the power of
HOME PERFORMANCE!

Get the Home Energy
e-newsletter

FREE!

SUBSCRIBE

NOW!