My Home Energy Project: Step 3 - Lighting
A year ago I started a project to reduce the energy consumption in my condo. I’ve gone through two keys steps already: measuring the energy I currently use and taking steps to reduce the energy used for heating (HVAC)). My next main area of focus was on lighting. Lighting accounts for approximately 20% of energy use, both in residential and commercial infrastructure. In order to reduce the energy used by lighting, I implemented two key upgrades:
- Replaced all of my lighting with LED bulbs. LEDs use 85% less energy than incandescent light bulbs, last over 20 years, and do not contain harmful mercury (like CFL bulbs do). LEDs are the best choice for the environment, your wallet in the long term, and waste reduction. Additionally the price of LED bulbs are dropping – I purchased most of my bulbs at IKEA for under $5 (IKEA has promised to source only LED blubs by 2016).
- Installed lighting controls. The lighting controls I purchased (Lutron) included both vacancy sensors as well as daylight sensors. The lighting must be switched on, but is programmed to automatically switch off if the sunlight is bright enough or if no one is in the room. Lighting sensors are under $20, available at most hardware stores, and programmable to your preferences.
So what exactly did the initiatives achieve last year? The total energy use for 2014 was 5179 kWh – while in 2013 it was 6484 kWh – well below the average household electricity consumption of 12,000 kWh.
I achieved an energy reduction of 20% in 2014!
Let’s take a more in-depth look at monthly energy use, starting with 2013 and moving into 2014. As you can see, below, the most notable difference was in the winter months (January, February, November, December). This makes sense, as last year I focused on improving heating.
My Home Energy Use for 2013
My Home Energy Use for 2014
Additionally, during 2014, I welcomed wonderful guests from AirBnB over the summer, as well as a roommate in the fall. Sharing a space is a great way to further reduce your personal footprint, as a good portion of the energy used is shared (heating, cooling, ventilation, refrigeration, hot water etc).
Step 4: Plug Loads…
Laura Paul, Sustainable Consultant P.Eng and MBA candidate is a change agent and is plant-powered. She is passionate about compassion, gender equality, and all forms of art. She is also president of the Canada Green Building Council Ottawa Region Chapter.
This blog was reprinted with permission. You can view the original post here.
Enter your comments in the box below:
(Please note that all blog entries and comments are subject to review prior to posting.)
While we will do our best to monitor all comments and blog posts for accuracy and relevancy, Home Energy is not responsible for content posted by our readers or third parties. Home Energy reserves the right to edit or remove comments or blog posts that do not meet our community guidelines.