SHARE

Replacement Windows for Dummies

Posted by Macie Schreibman on September 15, 2011
Replacement Windows for Dummies

Recently, Home Energy Publisher Tom White participated in an interview with "Replacement Windows for Dummies," the popular book series known for approachable information on nearly every topic. They discussed what's new in the world of windows, tips on hiring qualified window installers, and much more. Below is a snippet of their conversation.

RWFD: What are some of the most significant new developments in energy efficient windows that benefit homeowners?

TW:  There are some new technologies that DIYers can take advantage of in terms of different types of windows. In terms of the glazing or the glass unit themselves, there are recent developments in high performance windows and the core of the modern high performance window is the insulating glass unit. That’s the sealed assembly of two or more coated layers of glass and often they’re constructed with inert gas in between the panes that provides insulation. Sometimes they have films applied or even four layers of glass depending on the insulation value that you’re going for.

There are also new coatings that are being applied to lower the emittance of the radiation coming through the window and you can choose spectrally-select coatings which are often referred to as low E coatings. So if you want to have light coming in on the west side of your house but you are concerned about increasing your air conditioning bill because it might get too hot, there are types of spectrally-selective window coatings that will let the visible light in but will block the infra-red light spectrum, which is what we perceive as heat.

Additionally, there are new types of window frames that are low conducting. Typically, aluminum framed windows have a very high conductance but vinyl and composite frames have lower conductance and therefore higher insulating value.  So there have been improvements in the framing as well as in the insulating glass unit and the types of glazings and coatings applied to the glass itself.   

RWFD: What are some simple things a homeowner can do with the windows in their homes--short of replacing them--to save energy and money?

TW: A lot of older homes have windows that just need a little bit of tightening up--perhaps the wood has shrunk over the years or the house may have settled some. So you may just need to add some bronze metal or some other type of weather stripping or air sealing in the window channels. You can also apply felt to the window ledges to keep air out.

The primary concern with older windows is that they’re a source of air infiltration so if you can keep the sides of the windows plumb that helps to seal them. If the windows are not well aligned with the frame and the putty that holds the glass in the frame is not tight, you may be getting air in from around the glass itself. Plus there are films that can be applied to windows that will lower the amount of conductance and lower the heat gain. In order to provide more insulation,  you can add things like storm windows or shutters on the outside of the window and there are even window quilts which you can use to both lower  the amount of air coming into the home and improve the window’s insulation value.

Read the entire interview at ReplacementWindowsForDummies.com.

Comments
Add a new blog comment!

Enter your comments in the box below:

(Please note that all blog entries and comments are subject to review prior to posting.)

 

<< Back to blogs

While we will do our best to monitor all comments and blog posts for accuracy and relevancy, Home Energy is not responsible for content posted by our readers or third parties. Home Energy reserves the right to edit or remove comments or blog posts that do not meet our community guidelines.

Email Newsletter

Home Energy E-Newsletter

Sign up for our free monthly
E-Newsletter!

Harness the power of
HOME PERFORMANCE!

Get the Home Energy
e-newsletter

FREE!

SUBSCRIBE

NOW!